HELUPOWER® SOLARFLEX®-X PREMIUM red 1 x 4 mm²
Código do artigo 11027265
- cable for photovoltaic systems
- improved water resistance acc. to TÜV Rheinland 2 PfG 2750
- 1500 V DC
Detalhes do artigo HELUPOWER® SOLARFLEX®-X PREMIUM red 1 x 4 mm²
- Código do artigo
- 11027265
- Descrição do artigo
- HELUPOWER® SOLARFLEX®-X PREMIUM red 1 x 4 mm²
- AWG (aprox.)
- 12
- Exterior Ø mm (aprox.)
- 5.2 - 5.9
- Peso Especifico de Cobre kg/km
- 38.4
- Peso kg/km (aprox.)
- 60.0
- Base de cobre em EUR / 100kg
- 150
- VPE/m
- cortes individuais possíveis
- yes
- EAN/GTIN
- 4060892542626
- Número da tarifa aduaneira
- 85446010
Dados técnicos HELUPOWER® SOLARFLEX®-X PREMIUM red 1 x 4 mm²
| Cross-linked single core cable acc. to DIN VDE 0283-618 / DIN EN 50618, IEC 62930, TÜV Rheinland 2 PfG 2750 | |
| Temperature range | fixed -40°C to +90°C |
| Permissible operating temperature of the conductor | +120°C |
| Nominal voltage | AC U0/U 1000/1000 V DC U0/U 1500/1500 V |
| Test voltage | 6500 V |
| Minimum bending radius | fixed 5x Outer-Ø |
Detalhes HELUPOWER® SOLARFLEX®-X PREMIUM red 1 x 4 mm²
Estrutura do cabo
-
- Copper wire tinned, finely stranded acc. to DIN VDE 0295 Class 5 / IEC 60228 Class 5
-
- Core insulation: cross-linked compound
-
- x = without protective conductor
-
- Outer sheath: cross-linked compound
Propriedades
-
- resistant to: UV radiation, ozone, weathering effects, water
-
- for outdoor use
-
- direct burial
-
- halogen-free
Testes
-
- halogen-free acc. to DIN VDE 0482-754-1 / DIN EN 60754-1 / IEC 60754-1
-
- flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332-1-2 / IEC 60332-1-2
-
- smoke density acc. to DIN VDE 0482-1034-1+2 / DIN EN 61034-1+2 / IEC 61034-1+2
-
- UV-resistant acc. to DIN VDE 0283-618 / DIN EN 50618 Appendix E
-
- ozone-resistant acc. to DIN VDE 0283-618 / DIN EN 50618
-
- weather-resistant acc. to DIN VDE 0283-618 / DIN EN 50618 Appendix E
-
- DC Voltage resistance of the insulation acc. to DIN VDE 0283-618 / DIN EN 50618 Tab. 2
-
- Improved water resistance acc. to TÜV Rheinland 2 PfG 2750
Notas
-
- the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only
Aplicação
-
- HELUPOWER® SOLARFLEX®-X PREMIUM is suitable for permanent installation in fresh water (up to 1 metre water depth) and is used for wiring photovoltaic modules in floating solar parks. A wide range of applications in different countries is possible due to EN 50618 and IEC 62930 certification. Suitable for direct burial; we recommend: laying in pipes. The maximum DC voltage of the system in which the cable is installed must not exceed 1.8 kV. The cable is suitable for use in and on devices and systems with protective insulation (protection class II).