Name: MULTISPEED®-TRONIC-C-PUR
Brand: Helukabel
Price: 442.00 USD
Availability: InStock

Technical Data MULTISPEED®-TRONIC-C-PUR

PUR drag chain cable acc. to UL Std. 758 (AWM) Style 20233, CSA Std. C22.2 No. 210 - AWM I/II A/B
Temperature range	flexible -30°C to +80°C fixed -40°C to +80°C
Nominal voltage	UL (AWM) AC 300 V
Test voltage conductor/conductor	3000 V
Coupling resistance	at 30 MHz, approx. 250 Ohm/km
Minimum bend radius	flexible 7.5x Outer Ø fixed 4x Outer Ø

Details MULTISPEED®-TRONIC-C-PUR

- Copper wire bare, finely stranded, unilay with short lay lengths
- Conductor insulation: Special-PP
- Conductor identification acc. to DIN 47100, color coded
- x = without ground conductor
- Stranding:
- 2 - 5 conductor(s): conductors stranded into one layer with an optimally matched short lay length
- 7 - 25 conductor(s): conductors stranded into bundles with optimally matched, short lay lengths; bundles stranded together around a strength member
- Inner jacket: TPE, extruded filler
- Shield: tinned copper braided shield, approx. coverage 85%
- Outer jacket: Special grade of full polyurethane acc. to DIN VDE 0207-363-10-2 / DIN EN 50363-10-2 (compound type TMPU)
- Jacket color: black (RAL 9004)
- Length marking: in meters

- resistant to: oil, UV radiation, ozone, oxygen, weathering effects, hydrolysis, microbes, coolants, hydraulic fluids, acids, alkalis, greases, seawater and wastewater
- largely resistant to: chemicals
- highly abrasion-resistant, notch-resistant, tear-resistant, cut-resistant, wear-resistant, low adhesion
- for outdoor use
- suitable for use in drag chains
- highly resistant to alternating bending cycles
- halogen-free

- flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332-1-2 / IEC 60332-1-2, UL VW-1, CSA FT1
- oil-resistant acc. to DIN VDE 0473-811-404 / DIN EN 60811-404 / IEC 60811-404
- UV-resistant acc. to DIN EN ISO 4892-2
- weather-resistant acc. to DIN EN ISO 4892-2
- certifications and approvals:
- EAC

- the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only
- for use in drag chain systems:
- 1) the assembly instructions must be observed
- 2) for further application parameters, please refer to the selection tables
- 3) for special applications, we recommend contacting us and using our drag chain system inquiry form

- For continuous operation in drag chains with long traverse paths and high as well as low speeds of movement; for installation in dry, moist and wet rooms as well as outdoors. This drag chain cable is particularly robust and abrasion resistant and used where highest requirements in regards to flexibility and resilience are imposed. As a screened cable, it allows interference-free transmission of data and signals in measurement and control technology applications. EMC= Electromagnetic compatibillity; to optimize the EMC features we recommend a large round contact of the copper braiding on both ends.