Name: HELUPOWER® SOLARFLEX®-X H1Z2Z2-K UL
Brand: Helukabel
Availability: InStock

HELUPOWER® SOLARFLEX®-X H1Z2Z2-K UL

Buy items

Technical Data HELUPOWER® SOLARFLEX®-X H1Z2Z2-K UL

Cross-linked single conductor cable acc. to DIN VDE 0283-618 / DIN EN 50618, IEC 62930, UL Std. 4703 (PV Wire)
Temperature range	fixed -40°C to +90°C
Conductor operating temperature	+120°C
Nominal voltage	AC U₀/U 1000/1000 V DC U₀/U 1500/1500 V UL (PV) DC 2000 V
Test voltage	6500 V
Minimum bend radius	fixed 5x Outer Ø

Details HELUPOWER® SOLARFLEX®-X H1Z2Z2-K UL

- Copper wire tinned, finely stranded acc. to DIN VDE 0295 Class 5 / IEC 60228 Class 5, UL Std. 1581
- Conductor insulation: cross-linked compound
- x = without ground conductor
- Outer jacket: cross-linked compound
- Jacket color: black

- halogen-free acc. to DIN VDE 0482-754-1 / DIN EN 60754-1 / IEC 60754-1
- flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332-1-2 / IEC 60332-1-2, UL VW-1
- smoke density acc. to DIN VDE 0482-1034-1+2 / DIN EN 61034-1+2 / IEC 61034-1+2
- UV-resistant acc. to DIN VDE 0283-618 / DIN EN 50618 Appendix E
- ozone-resistant acc. to DIN VDE 0283-618 / DIN EN 50618
- weather-resistant acc. to DIN VDE 0283-618 / DIN EN 50618 Appendix E
- DC Voltage insulation resistance acc. to DIN VDE 0283-618 / DIN EN 50618 Tab. 2
- Sunlight Resistance (SUN RES) acc. to UL Std. 1581 Sec. 1200
- certifications and approvals:
- TÜV Rheinland

- HELUPOWER® SOLARFLEX®-X H1Z2Z2-K is used for wiring solar modules. Suitable for direct burial; recommendation: laying in pipes. Not suitable for permanent installation in water. The maximum permissible DC voltage of the system in which the cable is installed must not exceed 1.8 kV. The cable is suitable for use in and on devices and systems with protective insulation (protection class II). Approbations acc. to EN, IEC and UL allow for an economical storekeeping and simplification of parts lists.

Item description Part no.	AWG No.	Outer Ø mm (approx.)	Cu factor per km	Weight kg/km (approx.)