Name: MULTISPEED® 500-C-PUR UL/CSA black 4 G 1 mm²
Brand: Helukabel
Price: 599.00 USD
Availability: InStock

MULTISPEED® 500-C-PUR UL/CSA black 4 G 1 mm² Part No. 24429

Item Details MULTISPEED® 500-C-PUR UL/CSA black 4 G 1 mm²

Technical Data MULTISPEED® 500-C-PUR UL/CSA black 4 G 1 mm²

PUR drag chain cable acc. to UL Std. 758 (AWM) Style 20939, CSA Std. C22.2 No. 210 - AWM I/II A/B
Temperature range	flexible -30°C to +80°C fixed -40°C to +80°C
Nominal voltage	VDE AC U₀/U 300/500 V UL (AWM) AC 600 V
Test voltage conductor/conductor	3000 V
Coupling resistance	at 30 MHz, approx. 250 Ohm/km
Minimum bend radius	flexible 7.5x Outer Ø fixed 4x Outer Ø

- Copper wire bare, finely stranded, unilay with short lay lengths
- Conductor insulation: Special-PP
- Conductor identification acc. to DIN VDE 0293-334, black conductors with consecutive white numbers
- Ground conductor: starting with 3 conductors,
- G = with GN-YE ground,
- x = without ground conductor
- Stranding:
- 2 - 5 conductor(s): conductors stranded into one layer with an optimally matched short lay length
- 7 - 36 conductor(s): conductors stranded into bundles with optimally matched, short lay lengths; bundles stranded together around a strength member
- Inner jacket: TPE, extruded filler, black
- Shield: tinned copper braided shield, approx. coverage 85%
- Fleece wrap
- Outer jacket: Special grade of full polyurethane acc. to DIN VDE 0207-363-10-2 / DIN EN 50363-10-2 (compound type TMPU)
- Jacket color: black (RAL 9004)
- Length marking: in meters

- resistant to: oil, UV radiation, ozone, oxygen, weathering effects, hydrolysis, microbes, coolants, hydraulic fluids, acids, alkalis, greases, seawater and wastewater
- largely resistant to: chemicals
- highly abrasion-resistant, notch-resistant, tear-resistant, cut-resistant, wear-resistant, low adhesion
- for outdoor use
- suitable for use in drag chains
- highly resistant to alternating bending cycles
- halogen-free

- flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332-1-2 / IEC 60332-1-2, UL VW-1, CSA FT1
- oil-resistant acc. to DIN VDE 0473-811-404 / DIN EN 60811-404 / IEC 60811-404
- UV-resistant acc. to DIN EN ISO 4892-2
- weather-resistant acc. to DIN EN ISO 4892-2
- certifications and approvals:
- EAC

- the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only
- for use in drag chain systems:
- 1) the assembly instructions must be observed
- 2) for further application parameters, please refer to the selection tables
- 3) for special applications, we recommend contacting us and using our drag chain system inquiry form

- This UL/CSA approved cable is used when extreme demands are placed on the cable. Designed for export-oriented mechanical engineers, specifically in the USA and Canada. Gearing toward the needs of the industry, materials and stranding techniques permit uninterrupted use as highly flexible drag chain cables with long travelling distance capabilities at high or low speeds. For installation in dry, damp and wet rooms, as well as outdoors. This special, robust and abrasion-resistant drag chain cable is used where highest demands on flexibility and load capacity are made, e.g. in cable carrier systems, industrial robots, production lines, automation systems and on permanently moving machine parts for continuous use in multi-shift operation. These copper screened cables are ideally suited for interference-free data signal transmission in measurement and control technology. EMC = Electromagnetic Compatibility; in order to optimise EMC properties, we recommend a double-sided and all-round large contact area of the copper braiding.