TRONIC-CY (LiY-CY) gray 37 x 1 mm²
Part No. 16489
- color code DIN 47100, without repetitive colors
- with drain wire
- EMC-preferred type
Item Details TRONIC-CY (LiY-CY) gray 37 x 1 mm²
- Part No.
- 16489
- Item description
- TRONIC-CY (LiY-CY) gray 37 x 1 mm²
- AWG (approx.)
- 18
- Outer Ø mm (approx.)
- 18.5
- Cu factor per km
- 485.0
- Weight kg/km (approx.)
- 790.0
- Weight lb(s)/feet (approx.)
- 1741.7
- Copper base in EUR / 100 kg
- 150
- CPR class
- Eca
- Feet per Packaging Unit
- 1640, 3280
- Cut-to-length service available
- yes
- EAN/GTIN
- 4060892087967
- Customs tariff number
- 85444995
Technical Data TRONIC-CY (LiY-CY) gray 37 x 1 mm²
| PVC data cable in alignment with DIN VDE 0812 | |
| Temperature range | flexible -5°C to +80°C fixed -40°C to +80°C |
| Peak operating voltage | 0.14 mm²: 350 V 0.25 - 1.5 mm²: 500 V (not for high power current installation purposes) |
| Test voltage conductor/conductor | 0.14 - 0.25 mm²: 1200 V 0.34 - 1.5 mm²: 2000 V |
| Test voltage conductor/shield | 0.14 - 0.25 mm²: 800 V 0.34 - 1.5 mm²: 1200 V |
| Breakdown voltage | 0.14 - 0.25 mm²: 2400 V 0.34 - 1.5 mm²: 4000 V |
| Mutual capacitance conductor/conductor | at 800 Hz 0.14 - 0.25 mm²: approx. 100 pF/m 0.34 - 1.5 mm²: approx. 150 pF/m |
| Mutual capacitance conductor/shield | at 800 Hz 0.14 - 0.25 mm²: approx. 200 pF/m 0.34 - 1.5 mm²: approx. 270 pF/m |
| Characteristic impedance | 78 Ohm, (approx. value) |
| Inductance | approx. 0.65 mH/km |
| Coupling resistance | at 30 MHz, approx. 250 Ohm/km |
| Minimum bend radius | flexible 10x Outer Ø fixed 5x Outer Ø |
Details TRONIC-CY (LiY-CY) gray 37 x 1 mm²
Cable Structure
-
- Copper wire bare, 0.5 - 1.5 mm²: finely stranded acc. to DIN VDE 0295 Class 5 / IEC 60228 Class 5
-
- Wire structure:
- 0.14 mm²: approx. 18 x 0.1 mm
- 0.25 mm²: approx. 14 x 0.15 mm
- 0.34 mm²: 7 x 0.25 mm
-
- Conductor insulation: PVC acc. to DIN VDE 0207-363-3 / DIN EN 50363-3 (compound type TI2)
-
- Conductor identification in alignment with DIN 47100, color coded without color repetition from the 45th conductor
-
- x = without ground conductor
-
- Conductors stranded in layers with optimal lay lengths
-
- Foil wrap
-
- Drain wire, tinned copper
-
- Shield:
- 1 conductor(s): helically wound tinned copper wires, approx. coverage 85 %
- 2 - 61 conductor(s): tinned copper braided shield, approx. coverage 85 %
-
- Outer jacket: PVC acc. to DIN VDE 0207-363-4-1 / DIN EN 50363-4-1 (compound type TM2)
-
- Jacket color: gray (RAL 7001)
-
- Length marking: in meters
Properties
-
- largely resistant to: oil,
- for details, see "Technical Information"
Tests
-
- flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332-1-2 / IEC 60332-1-2
-
- certifications and approvals:
- EAC
Notes
-
- the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only
Application
-
- Suitable for flexible applications with free movement, without tensile stress and without forced motion control in dry, damp and wet rooms, however, not suitable for outdoor use. Used as control and signal cables in the milliampere range for computer systems, control devices, scales etc. Due to its extremely small outer-Ø, it is especially suitable for subminiature plugs, electronic devices etc. These cables with copper screening are ideally suited for interefence-free data and signal transmission for measurement and control technology. EMC= Electromagnetic Compatibility; in order to optimise EMC properties, we recommend a double-sided and all-round large contact area of the copper braiding.