SUPERTRONIC®-C-PVC gray 14 x 0.34 mm²
Part No. 49649
- largely oil resistant
- EMC-preferred type
- for use in continuously moving drag chains
Item Details SUPERTRONIC®-C-PVC gray 14 x 0.34 mm²
- Part No.
- 49649
- Item description
- SUPERTRONIC®-C-PVC gray 14 x 0.34 mm²
- AWG (approx.)
- 22
- Outer Ø mm (approx.)
- 9.5
- Cu factor per km
- 85.3
- Weight kg/km (approx.)
- 195.0
- Copper base in EUR / 100 kg
- 150
- Feet per Packaging Unit
- 328, 1640, 3280
- Cut-to-length service available
- yes
- EAN/GTIN
- 4060892144509
- Customs tariff number
- 85444995
Technical Data SUPERTRONIC®-C-PVC gray 14 x 0.34 mm²
| PVC drag chain cable in alignment with DIN VDE 0285-525-1 / DIN EN 50525-1 | |
| Temperature range | flexible -5°C to +70°C fixed -40°C to +70°C |
| Nominal voltage | AC U 350 V |
| Test voltage conductor/conductor | 1500 V |
| Breakdown voltage | 3000 V |
| Coupling resistance | at 30 MHz, approx. 250 Ohm/km |
| Minimum bend radius | flexible 7.5x Outer Ø fixed 4x Outer Ø |
Details SUPERTRONIC®-C-PVC gray 14 x 0.34 mm²
Cable Structure
-
- Copper wire bare, extra finely stranded
-
- Wire structure:
- 0.14 mm²: approx. 18 x 0.1 mm
- 0.25 mm²: approx. 32 x 0.1 mm
- 0.34 mm²: approx. 42 x 0.1 mm
-
- Conductor insulation: PVC acc. to DIN VDE 0207-363-3 / DIN EN 50363-3 (compound type TI2)
-
- Conductor identification acc. to DIN 47100, color coded
-
- x = without ground conductor
-
- Conductors stranded in layers with optimally matched lay lengths
-
- Fleece wrap
-
- Shield: tinned copper braided shield, approx. coverage 85%
-
- Outer jacket: Special-PVC acc. to DIN VDE 0207-363-4-1 / DIN EN 50363-4-1 (compound type TM2)
-
- Jacket color: gray (RAL 7001)
-
- Length marking: in meters
Properties
-
- largely resistant to: oil,
- for details, see "Technical Information"
-
- low adhesion
-
- suitable for use in drag chains
Tests
-
- flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332-1-2 / IEC 60332-1-2
-
- certifications and approvals:
- EAC
Notes
-
- the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only
-
- for use in drag chain systems:
- 1) the assembly instructions must be observed
- 2) for further application parameters, please refer to the selection tables
- 3) for special applications, we recommend contacting us and using our drag chain system inquiry form
Application
-
- These cables are ideal for the use in drag chain applications; for frequent lifting and bending stress in machine and tool construction, in robotics and on permanently moving machine parts. A long service life also guarantees reliable function and high efficiency. EMC= Electromagnetic Compatibility; in order to optimise EMC properties, we recommend a double-sided and all-round large contact area of the copper braiding.