Name: PURö-JZ-HF-YCP gray 4 G 1 mm²
Brand: Helukabel
Availability: InStock

PURö-JZ-HF-YCP gray 4 G 1 mm² Part No. 22436

Item Details PURö-JZ-HF-YCP gray 4 G 1 mm²

Technical Data PURö-JZ-HF-YCP gray 4 G 1 mm²

PUR drag chain cable in alignment with DIN VDE 0285-525-1 / DIN EN 50525-1
Temperature range	flexible -20°C to +80°C fixed -40°C to +80°C
Nominal voltage	AC U₀/U 300/500 V
Test voltage conductor/conductor	4000 V
Breakdown voltage	8000 V
Coupling resistance	at 30 MHz, approx. 250 Ohm/km
Minimum bend radius	flexible 10x Outer Ø fixed 5x Outer Ø

- Copper wire bare, extra finely stranded acc. to DIN VDE 0295 Class 6 / IEC 60228 Class 6
- Conductor insulation: oil-resistant PVC in alignment with DIN VDE 0207-363-3 / DIN EN 50363-3 (compound type TI2)
- Conductor identification acc. to DIN VDE 0293-334, black conductors with consecutive white numbers
- Ground conductor: starting with 3 conductors,
- G = with GN-YE ground, in the outer layer,
- x = without ground conductor (OZ)
- Conductors stranded in layers with optimally matched lay lengths
- Fleece wrap
- Inner jacket: PVC
- Shield: tinned copper braided shield, approx. coverage 85%
- Fleece wrap
- Outer jacket: Special grade of full polyurethane acc. to DIN VDE 0207-363-10-2 / DIN EN 50363-10-2 (compound type TMPU)
- Jacket color: gray (RAL 7001)
- Length marking: in meters

- resistant to: oil, UV radiation, ozone, oxygen, weathering effects, hydrolysis, microbes, coolants, hydraulic fluids, acids, alkalis, greases, seawater and wastewater
- highly abrasion-resistant, notch-resistant, tear-resistant, cut-resistant, wear-resistant, low adhesion
- for outdoor use
- suitable for use in drag chains

- the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only
- for use in drag chain systems:
- 1) the assembly instructions must be observed
- 2) for further application parameters, please refer to the selection tables
- 3) for special applications, we recommend contacting us and using our drag chain system inquiry form

- Extremely robust drag chain cable, which is distinguished by its high abrasion resistance and notch-tensile strength properties. Due to its resistance to mineral oils, notably against coolant emulsions, it is suited for use in particularly critical locations in machine, tool and plant construction, rolling mills and steelworks. Due to its high abrasion resistance and small bending radius, it is ideally suited for use in drag chain systems. These screened cables are ideally suited for interference-free data signal transmission in measurement and control technology. EMC = Electromagnetic Compatibility; in order to optimise EMC properties, we recommend a double-sided and all-round large contact area of the copper braiding.