PAAR-TRONIC gray 1 x 2 x 0.14 mm²
Part No. 19001
- color code DIN 47100
- for flexible use where structural or design conditions require small outer diameters
Item Details PAAR-TRONIC gray 1 x 2 x 0.14 mm²
- Part No.
- 19001
- Item description
- PAAR-TRONIC gray 1 x 2 x 0.14 mm²
- AWG (approx.)
- 26
- Outer Ø mm (approx.)
- 3.3
- Cu factor per km
- 2.7
- Weight kg/km (approx.)
- 20.0
- Copper base in EUR / 100 kg
- 150
- CPR class
- Eca
- Feet per Packaging Unit
- 328, 1640, 3280
- Cut-to-length service available
- yes
- EAN/GTIN
- 4060892081200
- Customs tariff number
- 85444995
Technical Data PAAR-TRONIC gray 1 x 2 x 0.14 mm²
| PVC data cable in alignment with DIN VDE 0812 | |
| Temperature range | flexible -5°C to +80°C fixed -30°C to +80°C |
| Peak operating voltage | 350 V (not for high power current installation purposes) |
| Test voltage conductor/conductor | 1200 V |
| Breakdown voltage | 2400 V |
| Mutual capacitance conductor/conductor | at 800 Hz 0.14 - 0.25 mm²: approx. 100 pF/m 0.34 - 0.75 mm²: approx. 150 pF/m |
| Capacitive coupling k1 | at 800 Hz, max. 300 pF/100m |
| Characteristic impedance | 78 Ohm, (approx. value) |
| Inductance | approx. 0.65 mH/km |
| Minimum bend radius | flexible 7.5x Outer Ø fixed 4x Outer Ø |
Details PAAR-TRONIC gray 1 x 2 x 0.14 mm²
Cable Structure
-
- Copper wire bare, 0.5 - 0.75 mm²: finely stranded acc. to DIN VDE 0295 Class 5 / IEC 60228 Class 5
-
- Wire structure:
- 0.14 mm²: approx. 18 x 0.1 mm
- 0.25 mm²: approx. 14 x 0.15 mm
- 0.34 mm²: 7 x 0.25 mm
-
- Conductor insulation: PVC acc. to DIN VDE 0207-363-3 / DIN EN 50363-3 (compound type TI2)
-
- Conductor identification acc. to DIN 47100 (paired stranding), color coded
-
- x = without ground conductor
-
- Conductors stranded in pairs with optimal lay lengths, Pairs stranded in layers with optimal lay lengths
-
- Foil wrap
-
- Outer jacket: PVC acc. to DIN VDE 0207-363-4-1 / DIN EN 50363-4-1 (compound type TM2)
-
- Jacket color: gray (RAL 7032)
-
- Length marking: in meters
Properties
-
- largely resistant to: oil,
- for details, see "Technical Information"
Tests
-
- flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332-1-2 / IEC 60332-1-2
-
- certifications and approvals:
- EAC
Notes
-
- the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only
Application
-
- Suitable for flexible applications with free movement, without tensile stress and without forced motion control in dry, damp and wet rooms, however, not suitable for outdoor use. Used as a control and signal cable in electronic engineering, measurement and control technology and wherever wiring must be executed using the smallest possible outside diameter, with consideration of electronic possibilities, e.g. computer systems, signal technology, scales etc.