MULTISPEED®-600-PUR-J black 1 G 25 mm²
Part No. 25891
- for extreme mechanical stress
Item Details MULTISPEED®-600-PUR-J black 1 G 25 mm²
- Part No.
- 25891
- Item description
- MULTISPEED®-600-PUR-J black 1 G 25 mm²
- AWG (approx.)
- 4
- Outer Ø mm (approx.)
- 11
- Cu factor per km
- 240.0
- Weight kg/km (approx.)
- 274.0
- Weight lb(s)/feet (approx.)
- 604.1
- Copper base in EUR / 100 kg
- 150
- Feet per Packaging Unit
- 328, 1640, 3280
- Cut-to-length service available
- yes
- EAN/GTIN
- 4060892173639
- Customs tariff number
- 85444995
Technical Data MULTISPEED®-600-PUR-J black 1 G 25 mm²
| PUR-jacketed single conductor cable acc. to UL Std. 758 (AWM) Style 10553, CSA Std. C22.2 No. 210 - AWM I/II A/B, in alignment with DIN VDE 0285-525-2-31 / DIN EN 50525-2-31 | |
| Temperature range | flexible -30°C to +80°C fixed -40°C to +80°C |
| Nominal voltage | VDE AC U0/U 600/1000 V UL (AWM) AC 1000 V |
| Test voltage | 3000 V |
| Minimum bend radius | flexible 5x Outer Ø fixed 3x Outer Ø |
Details MULTISPEED®-600-PUR-J black 1 G 25 mm²
Cable Structure
-
- Copper wire bare, extra finely stranded acc. to DIN VDE 0295 Class 6 / IEC 60228 Class 6
-
- Conductor insulation: PP
-
- Conductor identification: see datasheet
-
- G = with GN-YE ground,
- x = without ground conductor
-
- Outer jacket: Special grade of full polyurethane in alignment with DIN VDE 0207-363-10-2 / DIN EN 50363-10-2 (compound type TMPU)
-
- Jacket color: black (RAL 9005)
-
- Length marking: in meters
Properties
-
- resistant to: oil, UV radiation, ozone, oxygen, weathering effects, hydrolysis, microbes, coolants, hydraulic fluids, acids, alkalis, greases, seawater and wastewater
-
- highly abrasion-resistant, notch-resistant, tear-resistant, cut-resistant, wear-resistant, low adhesion
-
- for outdoor use
-
- suitable for use in drag chains
-
- halogen-free
Tests
-
- flame-retardant acc. to UL VW-1, CSA FT1
-
- oil-resistant acc. to DIN VDE 0473-811-404 / DIN EN 60811-404 / IEC 60811-404
-
- UV-resistant acc. to DIN EN ISO 4892-2
-
- weather-resistant acc. to DIN EN ISO 4892-2
Notes
-
- the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only
-
- for use in drag chain systems:
- 1) the assembly instructions must be observed
- 2) for further application parameters, please refer to the selection tables
- 3) for special applications, we recommend contacting us and using our drag chain system inquiry form
Application
-
- This special drag chain cable permits extended use with extreme requirements, with free movement, without tensile stresses or forced movements. Suitable for installation in long traverse paths and with high speeds in dry, moist and wet environments as well as for outdoor use.