Name: JZ-500-FC-PUR gray 7 G 1 mm²
Brand: Helukabel
Availability: InStock

JZ-500-FC-PUR gray 7 G 1 mm² Part No. 23451

oil resistant
highly abrasion-resistant
notch, cut and wear resistant
EMC-preferred type
without an inner jacket
for outdoor use
robust control and connection cable for high mechanical stress in machine, tool and plant construction

Item Details JZ-500-FC-PUR gray 7 G 1 mm²

Technical Data JZ-500-FC-PUR gray 7 G 1 mm²

PUR control and connection cable in alignment with DIN VDE 0285-525-1 / DIN EN 50525-1
Temperature range	flexible -10°C to +80°C fixed -40°C to +80°C
Nominal voltage	AC U₀/U 300/500 V
Test voltage conductor/conductor	3000 V
Breakdown voltage	6000 V
Coupling resistance	at 30 MHz, approx. 250 Ohm/km
Minimum bend radius	flexible 10x Outer Ø fixed 5x Outer Ø

- Copper wire bare, finely stranded acc. to DIN VDE 0295 Class 5 / IEC 60228 Class 5
- Conductor insulation: PVC acc. to DIN VDE 0207-363-3 / DIN EN 50363-3 (compound type TI2)
- Conductor identification acc. to DIN VDE 0293-334, black conductors with consecutive white numbers
- Ground conductor: starting with 3 conductors,
- G = with GN-YE ground, in the outer layer,
- x = without ground conductor (OZ)
- Conductors stranded in layers with optimal lay lengths
- Foil wrap
- Shield: tinned copper braided shield, approx. coverage 85%
- Fleece wrap
- Outer jacket: Special grade of full polyurethane acc. to DIN VDE 0207-363-10-2 / DIN EN 50363-10-2 (compound type TMPU)
- Jacket color: gray (RAL 7001)
- Length marking: in meters

- resistant to: oil, UV radiation, ozone, oxygen, weathering effects, hydrolysis, microbes, coolants, hydraulic fluids, acids, alkalis, greases, seawater and wastewater
- highly abrasion-resistant, notch-resistant, tear-resistant, cut-resistant, wear-resistant, low adhesion
- for outdoor use

- the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only

- Highly abrasion-resistant, notch-resistant and therefore extremely robust control cable; for flexible use involving medium mechanical stress and free movement without tensile stress and without forced movement in dry, damp and wet rooms as well as outdoors. For use in machine, tool and plant construction, in rolling mills and steelworks. Can be installed quickly and safely thanks to its good flexibility. The high shielding density enables interference-free transmission of signals and pulses. EMC= Electromagnetic Compatibility; in order to optimise EMC properties, we recommend a double-sided and all-round large contact area of the copper braiding.