H07Z-K green-yellow 1 G 35 mm²
Part No. 51832
- halogen-free single conductor
- finely stranded
- bare wire
Item Details H07Z-K green-yellow 1 G 35 mm²
- Part No.
- 51832
- Item description
- H07Z-K green-yellow 1 G 35 mm²
- Conductor Color
- green-yellow
- AWG (approx.)
- 2
- Outer Ø mm (approx.)
- 9.7 - 12.1
- Cu factor per km
- 336.0
- Weight kg/km (approx.)
- 375.0
- Weight lb(s)/feet (approx.)
- 826.7
- Copper base in EUR / 100 kg
- 150
- CPR class
- Eca
- Feet per Packaging Unit
- 1640, 3280
- Cut-to-length service available
- yes
- EAN/GTIN
- 4060892223198
- Customs tariff number
- 85444995
Technical Data H07Z-K green-yellow 1 G 35 mm²
| Single conductor, H07Z-K acc. to DIN VDE 0285-525-3-41 / DIN EN 50525-3-41; 07Z-K in alignment with DIN VDE 0285-525-3-41 / DIN EN 50525-3-41 | |
| Temperature range | flexible -5°C to +90°C fixed -40°C to +90°C |
| Conductor operating temperature | +90°C |
| Nominal voltage | AC U0/U 450/750 V |
| Test voltage | 2500 V |
| Minimum bend radius | fixed <8 mm: 4x Outer ø 8-12 mm: 5x Outer ø >12 mm: 6x Outer ø |
Details H07Z-K green-yellow 1 G 35 mm²
Cable Structure
-
- Copper wire bare, finely stranded acc. to DIN VDE 0295 Class 5 / IEC 60228 Class 5
-
- Foil wrap around conductor permitted
-
- Conductor insulation: cross-linked polyolefin acc. to DIN VDE 0207-363-5 / DIN EN 50363-5 (compound type EI5)
-
- Conductor identification: see datasheet
Properties
-
- resistant to: ozone
-
- halogen-free
Tests
-
- halogen-free acc. to DIN VDE 0285-525-1 / DIN EN 50525-1 Appendix B
-
- flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332-1-2 / IEC 60332-1-2
-
- smoke density acc. to DIN VDE 0482-1034-1+2 / DIN EN 61034-1+2 / IEC 61034-1+2
-
- ozone-resistant acc. to DIN VDE 0473-811-403 / DIN EN 60811-403
-
- certifications and approvals:
- H07Z-K: HAR
- H07Z-K: EAC
Notes
-
- the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only
-
- Approved conductor colors: black, green-yellow, blue, brown, red, white, gray, violet, orange, pink
Application
-
- For applications that require a low development of smoke and corrosive gases in case of fire. Installation in pipes on and under plaster or in similar enclosed systems. Suitable for protected, permanent laying in lighting installations or switch and control devices up to 1000V AC or 750V DC against earth.